Wire ZTProxy residential proxies into AdsPower, GoLogin, or Multilogin-class tools via standard HTTP/SOCKS fields—rotating, sticky, or static; verify exit IP; authorised use only.
What this page solves
Antidetect browsers such as AdsPower, GoLogin, and Multilogin help teams isolate browser identities across profiles. Residential proxies help those profiles egress on real ISP networks instead of obvious data-centre ranges. Used together—and used for authorised work such as ad verification, localisation QA, and public-side market sampling—they are a common stack. The usual friction is not “which brand logo to install,” but: which form fields to fill, when to pick rotating versus sticky versus static, how to align timezone and locale, and how to confirm the exit IP.
This guide is a practical HTTP / SOCKS wiring checklist. Copy host, port, username, and password from the ZTProxy console into your antidetect Proxy form, then verify the exit. You do not need a ZTProxy-branded browser plugin, and you should not look for a fictional `*-antidetect` product SKU—the live products are rotating residential and static residential. For protocol detail see HTTP / SOCKS5 setup. A deeper English docs page already exists at docs: residential proxy + antidetect; this marketing guide is the Scheme A primary deliverable for both locales. This is not an account-farming tutorial.
Why fingerprint and residential belong together
Fingerprint alone is not enough. If every profile exits through the same data-centre IP—or a noisy shared gateway—platforms may still correlate sessions. Teams then see verification walls, empty inventories, or region-wrong content.
Proxy alone is not enough. A clean residential IP with a messy, shared browser environment can still look automated. Antidetect tools isolate cookies, canvas/WebGL fingerprints, fonts, and timezone per profile; proxies handle network egress.
Friction operators report often: rotating too aggressively mid-login breaks sessions; sticky or static is needed for some flows; docs assume “install our Chrome extension” that does not exist in your stack—you only need four fields; list prices and self-serve quotes diverge—the console wins.
Choose product and session first: rotating / sticky / static
| Scenario | Better fit | Notes |
|---|---|---|
| Public sampling, light checks, many exits | Rotating residential (billed per GB) | Rotation is fine for discovery; do not bind the same checkout cookie jar to aggressive rotation |
| Short flow that needs one exit (login → a few steps) | Rotating + sticky session | Sticky is short-lived stability on rotating product; sticky ≠ static; window follows the console; see sticky vs static |
| Fixed identity for the subscription term | Static residential (per IP · month) | Shared vs dedicated trade-offs: shared vs dedicated |
| Multi-market localisation spot checks | Rotating geo + short sticky when needed | Align timezone/locale; see localisation testing |
| Ad creative / landing-page geo checks | Rotating or short sticky | Scene page: ad verification |
Category primer: rotating vs static. Billing units: GB vs IP. Rule of thumb: one profile ↔ one sticky session or one static IP when the site expects a stable identity; use higher rotation for discovery traffic.
Generic proxy form: four fields + HTTP vs SOCKS
Almost every antidetect Proxy panel asks for the same four values (labels vary):
- Host — the proxy host from the console (do not prepend `http://` unless that tool’s paste box explicitly wants a full URL)
- Port — the port that matches the protocol
- Username — the proxy username (not your antidetect login, not your ZTProxy website email)
- Password — the proxy password
Pick HTTP or SOCKS5 to match what that console endpoint actually serves. Strings always follow the live console—never paste stale blog samples. Step-by-step protocol notes: HTTP / SOCKS5 residential setup.
Generic wiring order:
- Register and sign in; pick rotating or static and the location you need—inventory and final rates appear in the console.
- Copy host / port / username / password for that endpoint.
- Open the profile’s Proxy settings in AdsPower, GoLogin, Multilogin, or a similar tool.
- Select HTTP or SOCKS to match the console.
- Paste the four fields → run the tool’s Check / Test proxy → save.
- Launch the profile and confirm exit IP / region inside the browser.
Per-tool field mapping (high level, no fake screenshots)
Menus change by version. Map fields, not pixel paths, and ignore third-party fake screenshots.
AdsPower-class tools
Create or edit a profile → Proxy / Proxy Info → choose custom / third-party (do not select the tool’s bundled proxy pack unless you bought that) → set HTTP or SOCKS5 → fill Host, Port, account, password → Check Proxy → confirm country/region → save. Some builds accept bulk lines as `host:port:user:pass`; still spot-check after import.
GoLogin-class tools
Profile settings → Proxy → Your proxy / custom → paste box (often `host:port:user:pass`) or separate fields → choose protocol → test → save → launch and re-check exit IP in-browser.
Multilogin-class tools
Profile → Proxy → Custom → HTTP / HTTPS / SOCKS5 → four fields (or `IP:port:login:password` if the tool accepts that string) → Check proxy → save only after a pass. If the tool can auto-align timezone from the proxy IP, enable it and spot-check.
Shared pattern across tools: custom/third-party proxy + protocol + four fields + check + save + verify after launch. ZTProxy does not require a branded plugin. If a tool supports system proxy or PAC, the same credentials apply.
Timezone, locale, and geo alignment
When the target site cares about regional experience, align the profile’s timezone, UI language, and (if exposed) geolocation with the proxy exit region. Many antidetect tools can derive these from the proxy IP; if you set them manually, match the country/city you purchased—not your laptop’s default zone. For localisation QA flows see localisation & app testing.
Verify exit IP and a short troubleshooting list
- Does the in-tool Check Proxy country match what you ordered?
- Does an in-browser IP lookup after launch match the Check result?
- Do protocol and port match (HTTP port into a SOCKS slot fails)?
- Are username/password complete (if sticky tokens live in the username, do not truncate)?
- Did aggressive rotation mid-login break the session—should this flow use sticky or static instead?
- Did every field come from the current console rather than an old note?
Still stuck: re-read HTTP / SOCKS setup and docs quickstart, or open a ticket / [email protected] (hours follow the on-site support page; do not assume an unpromised 24/7 English live desk).
Pricing, payments, and console-wins
Published USD reference rates (backend and console win): rotating about $0.40/GB; 100 TB pack about $0.20/GB (fixed pack); shared static about $1.50/IP/month; dedicated about $5/IP/month. Details: pricing. Self-serve accounts often follow reseller pricing—confirm the live quote in the console.
Payments (pricing page as of 2026-11-09): USDT / USDC are available (networks and steps follow the console). Visa / Mastercard are applying / pending—do not plan card-only onboarding until the console enables them. Billing units: GB vs IP.
AUP: authorised business only — no farming / fraud
Residential proxies and antidetect browsers are dual-use. Customers must follow applicable law and our Acceptable Use Policy: prefer legitimate research, localisation testing, ad verification, brand protection, and authorised public-data paths; do not use the service for abuse, fraud, credential attacks, account-farming-class activity, or unauthorised access. See also Terms. Mainland China use is not supported.
This page is not legal advice; consult your own counsel for material projects. Scene entry points: ad verification · localisation testing · market research.
FAQ
Do I need a ZTProxy browser plugin?
No. Copy host / port / user / pass from the console into the antidetect Proxy form. There is no required branded plugin and no fictional `*-antidetect` product SKU.
Are AdsPower, GoLogin, and Multilogin fields the same?
At a high level, yes: protocol + host + port + username + password, then a check. Menu names and paste formats differ by version—follow your build.
Should multi-profile work use rotating, sticky, or static?
Sampling usually fits rotating per GB; short same-exit flows fit sticky (≠ static); term-long fixed identity fits static per IP·month. See the table above plus rotating vs static and sticky vs static.
Is a sticky session the same as a static IP?
No. Sticky is short-lived stability on a rotating product; static is purchased per IP·month. Details: sticky session vs static IP.
Should timezone and language match the proxy region?
Yes when the target site cares about regional experience. Let the tool auto-align from the proxy IP when possible, and spot-check manually.
Where do price and payment truth live?
In the console for deal price and inventory; public pointers on pricing. USDT/USDC available; Visa/Mastercard applying/pending.
Can we use this for account farming or multi-account evasion?
No. Authorised business and public-side verification paths allowed by the AUP only; no farming, no login-wall bypass, no fraud. See AUP.
Is mainland China supported? Where is the deeper docs page?
Mainland China is not supported. Protocol steps: HTTP/SOCKS and quickstart. Deeper English docs: antidetect guide. More guides: Guides hub.
All proxy products on this site are not supported for use in mainland China.
Next steps
- Create a rotating or static endpoint in the console and copy the four fields.
- Map them into your antidetect Proxy panel → Check → verify exit after launch.
- Read AUP · Terms; open ad verification / localisation testing when relevant.
- Cross-check HTTP/SOCKS · rotating vs static · sticky vs static · shared vs dedicated · pricing · quickstart.
- Deeper docs: antidetect guide; more on the Guides hub.
Get four fields from the console → paste into antidetect Proxy → Check and verify exit
Still unsure? On-site support or [email protected]. Authorised business only; no account farming; mainland China not supported; residential only; sticky ≠ static; price and inventory follow backend and console; no branded plugin required.